15” Raised Bed Corners, Set of 2

Details

Item# 8587814
NEW & Exclusive
4.5 1469
$34.95

Product Actions

Add to cart options

In Stock

Add to Wishlist

Additional Information

NEW & Exclusive | Gardener's Supply Lifetime Aluminum Raised Bed Corners: the Fast, Foolproof Way To Build a Raised Bed

  • Made in Vermont by Gardener's Supply
  • Choose from 6 heights, each sized to fit standard 2 x 6, 2 x 8, 2 x 10 and 2 x 12 milled lumber
  • Also available: Rot-Resistant Cedar Boards
  • Set of 2 - buy two sets to build a complete bed
Watch: How to Use Raised Bed Corners 

The hardest part of building a raised bed is constructing corners that are square, strong and trim-looking. Our ingenious Gardener's Supply Raised Bed Corners are brackets that shorten building time and result in a handsome, sturdy raised bed every time.

Product Details

  • Powder-coated aluminum with plastic caps to keep out water
  • Six heights, all designed to fit standard 2 x milled lumber (1 1/2" actual thickness)
  • Exact heights:
    6” = 5-3/8”
    8” = 7-3/8”
    10” = 9-3/8”
    12” = 11-3/8”
    15” = 15”
    23” = 23”
    The cap insert adds 3/16 of an inch to the height after popping them into the holes.
  • Philips screws included
  • Gardener's Supply Exclusive

REVIEW SNAPSHOT®

by PowerReviews
 
4.7

(based on 3 reviews)

Ratings Distribution

  • 5 Stars

     

    (2)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

100%

of respondents would recommend this to a friend.

Reviewed by 3 customers

Displaying reviews 1-3

Back to top

 
5.0

Great product

By Bonsai Girl

from Salt Lake CIty

Verified Reviewer

Pros

  • Easy to use

Cons

    Best Uses

      I used these corners to build a 4'x8' box base to overwinter outdoor bonsai plants. I used 2x8 rough cedar (these boards measure 1.5 x 7.25") and the fit was perfect. I had no problems with the screws that came with the corners. I like the heavy weight, these are not flimsy and they made putting the box together, in a nice rectangle with perfect corners, easier. And the final product looks good--very professional look with these corners. I built an extension for the top so the back height is 29". Then built a 2x2 frame and installed twin wall polycarbonate on the top. This is in the shade so the bonsai do not get too warm during the winter but this would make an awesome cold frame for growing vegetables if it had sun exposure. I looked all over for a cold frame like this. Couldn't find it so I built it.

       
      4.0

      very nice corner brackets

      By Jerry

      from Lexington, KY

      Pros

      • Aluminum Wont Rust
      • Convenient Predrilled Hol
      • Easy To Assemble
      • Very Smart Looking

      Cons

      • Cost
      • Holes 2 Small For Screws

      Best Uses

        These arrived quickly and have a slot width of 1.5 in, which is perfect for finished 2" stock, but too narrow for rough-cut lumber, about 1.75 in. The pre-drilled holes were too small for the provided screws, but easily drilled out with standard high-speed steel drill bit, or cobalt steel bit. Assembly very easy, looks great. 15" is a little too wide for two 2" X 8" boards (which come to about 14.5". The guide for cubic feet of planting soil is accurate. It took 40 cu ft for my 4' X 8' X 15" bed. I used cedar to avoid rot and chemicals, and it looks great!

        • Was this a gift?:
        • No
         
        5.0

        Raised bed corners are wonderful!

        By Fa

        from Idaho

        Verified Reviewer

        Pros

        • Attracive
        • Easy to use
        • Strong

        Cons

        • Expensive

        Best Uses

        • In the garden

        This was my first raised bed experiment. I decided to try these corners because I didn't want to have to re-do them ever! I was amazed at how easy they were to use. I am not much of a carpenter, but the boards slipped right in and it was so easy for the corners to instantly be square! I used a hand circular saw with sawhorses. I used 2 x 8 redwood. Also an electric drill with a Philip's end on it. I plan on making lots more! This one has my rhubarb and asparagus in it. Next I am making one 23" tall so I don't have to bend over to pick strawberries! Love these corners!

        • Was this a gift?:
        • No

        Displaying reviews 1-3

        Back to top

         
        Product Instructions
        Download instructions for 15” Raised Bed Corners, Set of 2 as a PDF
        Videos

        Articles