Lightweight Hose Coupler Assembly

Our Lightweight Hose comes with snap-on couplers that make connections fast and easy. Tighten the orange collars until the couplers are secure.

If the couplers need to be reattached to the hose, follow the steps below:

1. Unscrew the orange collar and remove it from the coupler.

2. Slide the hose-end through the collar first. Then insert the coupler into the cut end of the hose as shown below.

3. Slide the collar toward the coupler and screw into place.

You can disconnect these couplers from your faucet without unscrewing them. Simply pull and slide the orange body back and the coupler will disconnect. To reattach, push the coupler back on until it "clicks" into place.

If you have any questions, contact us at: info@gardeners.com

Share This Article