Instructions for the LED Snowflake Lights
Read all instructions before using the LED Snowflake Lights.
- For indoor use only.
- Keep batteries dry at all times.
- Keep out of reach of children under 6 years old.
- Keep instructions for future reference.
- Suction Cup
- Battery Compartment
- Acrylic Snowflake
- CR2032 Button Batteries
After unpacking, place the Snowflake on a clean and level surface. Ensure the suction cup is securely on the Snowflake. Use care when inserting the two batteries. Always hold the unit by the battery housing, not by the acrylic snowflake, as shown in the diagram, below.
To turn on the light, turn the on/off switch to the "on" position.To Replace Batteries
Use care when replacing batteries. Always hold the unit by the battery housing, not by the acrylic snowflake, when removing or replacing the battery. See diagram, below.
To remove and replace the battery, slide the battery compartment up and out following the arrows in the diagram below. Make sure that the battery is inserted with the correct polarity.
Batteries are to be handled by an adult only and replaced with CR2032 button cell batteries.
Please dispose/recycle used batteries properly at your nearest hazardous waste/recycling/sorting facility.
Remove batteries when not using for long periods of time or for long-term storage. Replacement Batteries are available, sold in sets of 20.